Answering Your Questions About Roofing

Common Metal Roofing Problems-DIY Vs. Professional Roofing Services

by Donald Evans

Metal roofs are one of the most eco-friendly and durable roofing options available. However, just like any other type of roofing material, a metal roof will may occasionally need maintenance and small repairs. Many of these small repairs are somewhat easy to perform if you are comfortable climbing a ladder and onto the roof. Here are some of the most common metal roofing problems that you may be able to repair on your own, and the ones that require professional metal roofing services.

DIY Metal Roof Repairs

One of the most common metal roof problems that you may be able to repair on your own are loose nails. Structural shifting and time can cause roofing nails to loosen, so it's essential to routinely inspect the roof to search for loose nails. If you find loose screws or nails, simple remove them and replace with new ones. If you use the same hole, first fill the hole with roofing cement or sealant and make sure it's dry before inserting the new nail. Other DIY metal roof repairs you may consider doing include:

  • Rust areas-if the area is small, try using an industrial rust remover to remove the rust and then use a liquid sealant or metal roof paint to prevent further corrosion. If the damage or rust is severe, it's best to contact a professional metal roofing service to replace the damaged roofing section.
  • Loose flashing-heavy storms and winds can pull the flashing away from seams. If you find loose flashing on a seam, apply urethane sealant or roof cement between the flashing and the metal roof. Be sure to weigh down the flashing until the sealant or cement cures, which usually is about 24 hours.
  • Small leaks-if you notice a leak in the attic, it's important to do a temporary fix. Small leaks can sometimes be patched with a quality urethane roofing cement, but keep in mind that this is only a temporary fix that is designed to slow the leak until a metal roofing contract can make permanent repairs.

Professional Metal Roof Repairs

A roof leak is one of the most common problems homeowners may experience with a metal roof. Poor craftsmanship is often the result of punctures and gaps in metal roofing,, which leads to leaks. If you notice a leak, it should be addressed as soon as possible by a reputable metal roofing contractor. Other metal roof repairs that require professional metal roofing services include:

  • Blow-Offs-a blow-off can also occur as a result of poor installation. For example, if the flashing has been poorly attached, open seams and gaps may cause parts of the roof to blow off. To avoid this, have routine inspections and maintenance done by a reputable metal roofing contractor. Replacing areas that have blown off should be done only by a reputable metal roofing contractor.
  • Tears and punctures may occur, especially if there is extensive foot traffic on a metal roof. This type of problem typically occurs during the initial construction, but can also happen during routine maintenance or while accessing other problems from the roof, such as trimming trees. A professional metal roofing service will have the appropriate tools and equipment to repair these types of damages.
  • Loose seams may occur when screws become loose as a result of the metal roof expanding and constricting with changes in the weather. Loose seams should be addressed by a professional metal roofing contractor as soon as possible to prevent leaks and other damages.

The best way to prevent the risk of damages is with routine maintenance and inspections. Having professional metal roofing services conduct annual inspections means potential damages can be addressed before the problem worsens.

Contact a business like Solis Roofing Contractors to learn more.

Share